1964 D Dime- please look at the mint mark.
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
- DSCoins
- Coin Guru
- Posts: 3459
- Joined: Thu May 16, 2019 7:47 pm
- Location: South central PA.
- Has thanked: 159 times
- Been thanked: 932 times
Re: 1964 D Dime- please look at the mint mark.
Paul, I search for die cavity wear. The only thing that showed up was die deterioration. Giving that can it be assumed that die cavity wear is die deterioration?
USN Retired Jun1977-Jun 1997/100% disabled VET. (Not a wounded warrior)
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
- Paul
- Master Die Variety Examiner
- Posts: 19053
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 905 times
- Been thanked: 3317 times
Re: 1964 D Dime- please look at the mint mark.
Yeah, that's.................... a way to put it, without getting into a long dissertation
- Paul
- Master Die Variety Examiner
- Posts: 19053
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 905 times
- Been thanked: 3317 times
Re: 1964 D Dime- please look at the mint mark.
Next, you should research "Die Markers" for confirmation of your findings
- DSCoins
- Coin Guru
- Posts: 3459
- Joined: Thu May 16, 2019 7:47 pm
- Location: South central PA.
- Has thanked: 159 times
- Been thanked: 932 times
Re: 1964 D Dime- please look at the mint mark.
Paul.
Do you have or know of a on-line reference in which I can read/study Die Cavity Wear?
Do you have or know of a on-line reference in which I can read/study Die Cavity Wear?
USN Retired Jun1977-Jun 1997/100% disabled VET. (Not a wounded warrior)
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
- Paul
- Master Die Variety Examiner
- Posts: 19053
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 905 times
- Been thanked: 3317 times
- Paul
- Master Die Variety Examiner
- Posts: 19053
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 905 times
- Been thanked: 3317 times
Re: 1964 D Dime- please look at the mint mark.
I just got back in, and really didn't have a chance to look around much...... but wanted to get back to you as soon as I could
I used the term "Die Cavity Wear"....... in the sense that, being an old timer, you do not see this on any of the other devices
Of course I would need to see it "In Hand" to give you a positive determination on the type of so-called "Strike Doubling"
Keep in mind that a fresh die will have a sharper "Edge" to the devices on the coin with respect to the field ............. after repetitive striking, these "Edges" will lose their sharpness..... In turn, allowing for what some
may call "creep/squeeze out/overflow" of metal from the edge of the device under striking pressure
If you take a little time to inspect the images carefully, you'll see that there is no "Notching"
I used the term "Die Cavity Wear"....... in the sense that, being an old timer, you do not see this on any of the other devices
Of course I would need to see it "In Hand" to give you a positive determination on the type of so-called "Strike Doubling"
Keep in mind that a fresh die will have a sharper "Edge" to the devices on the coin with respect to the field ............. after repetitive striking, these "Edges" will lose their sharpness..... In turn, allowing for what some
may call "creep/squeeze out/overflow" of metal from the edge of the device under striking pressure
If you take a little time to inspect the images carefully, you'll see that there is no "Notching"
- Rating: 2.94%
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 193 Views
-
Last post by Earle42
-
- 3 Replies
- 2930 Views
-
Last post by silviosi
-
- 8 Replies
- 578 Views
-
Last post by Earle42
-
- 5 Replies
- 208 Views
-
Last post by Earle42
-
- 4 Replies
- 458 Views
-
Last post by Worldwide C
-
- 4 Replies
- 357 Views
-
Last post by Earle42
-
- 10 Replies
- 1237 Views
-
Last post by Daniel
-
- 2 Replies
- 470 Views
-
Last post by Sergio52
-
- 6 Replies
- 603 Views
-
Last post by nickmonroe0704
-
- 5 Replies
- 432 Views
-
Last post by Daniel