I’m not sure if this is anything

If it doesn't fit anywhere else, POST IT HERE. Numismatic related posts only.

Moderator: Daniel

Post Reply
Message
Author
DYEDYE1
Coining Around
Posts: 20
Joined: Fri Mar 26, 2021 11:20 pm
Been thanked: 9 times

I’m not sure if this is anything

#1 Unread post by DYEDYE1 »

The entire coin looks to be frosted almost like a proof, however it’s porous both sides. I also notice that when you flip the coin over it’s a little off center. Any ideas or thoughts would be much appreciated.
Attachments
8D92A3D7-056C-42A8-A80E-C393992F9D8C.jpeg
2228C86B-D8E8-4593-B933-4FBCFE91ED27.jpeg
B136C541-46D0-4068-A567-246C1789C876.jpeg
45492107-1C34-47A8-A2CD-4F783C1190FD.jpeg
DCBC0E0B-3BA7-48C4-B9DA-1FFF7A750EA3.jpeg

User avatar
Daniel
Administrator
Administrator
Posts: 15844
Joined: Wed Jan 28, 2009 4:59 pm
Location: Ohio
Has thanked: 361 times
Been thanked: 860 times
Contact:

Re: I’m not sure if this is anything

#2 Unread post by Daniel »

It's been exposed to a corrosive chemical, so this is post mint damage.

User avatar
BillyKid00
Coin Collector
Posts: 33
Joined: Sat Jul 18, 2020 11:35 am
Has thanked: 32 times
Been thanked: 3 times

Re: I’m not sure if this is anything

#3 Unread post by BillyKid00 »

Hello!! Nice Coin!! Looks like a die crack?? Mabey Strike through?? Strikethrough grease possibly?? Not sure if anyone here told you about photos inside the 2/2s? It makes it really difficult to give an accurate assessment. But That's the extent of what I know to be Absolute. Sorry couldn't be more of assistance. I'm still Learning myself!!

User avatar
Daniel
Administrator
Administrator
Posts: 15844
Joined: Wed Jan 28, 2009 4:59 pm
Location: Ohio
Has thanked: 361 times
Been thanked: 860 times
Contact:

Re: I’m not sure if this is anything

#4 Unread post by Daniel »

It's been exposed to corrosive chemicals like an acid. It's worth face value.

DYEDYE1
Coining Around
Posts: 20
Joined: Fri Mar 26, 2021 11:20 pm
Been thanked: 9 times

Re: I’m not sure if this is anything

#5 Unread post by DYEDYE1 »

Thank you Daniel I appreciate it Sir.

Post Reply