Double sided error

If it doesn't fit anywhere else, POST IT HERE. Numismatic related posts only.

Moderator: Daniel

Post Reply
Message
Author
Soldier1488
Coining Around
Posts: 3
Joined: Mon Jan 04, 2021 10:33 pm

Double sided error

#1 Unread post by Soldier1488 »

72 penny with rim erroron both sides. Any one see a coin with errors on both sides before?
20210104_120927.jpg
20210104_120927.jpg
Attachments
20210104_120908.jpg

User avatar
SensibleSal66
Coin Expert
Posts: 1857
Joined: Thu Sep 10, 2020 8:06 am
Location: Connecticut
Has thanked: 701 times
Been thanked: 425 times

Re: Double sided error

#2 Unread post by SensibleSal66 »

Hi and Welcome ! I mean it's a tiny bit Off -Center. I'm not sure if there's much of premium though . I would hang on to it . : )
Member of CONECA
" All replies are my opinion based on experience"
Casual Collector 40+ years , 10 years Error coins ( still learning).

Soldier1488
Coining Around
Posts: 3
Joined: Mon Jan 04, 2021 10:33 pm

Re: Double sided error

#3 Unread post by Soldier1488 »

There is a separate lip in a Cresent along the thick part of the rim like you would see on a double stamp but no letter doubling that I can see

Soldier1488
Coining Around
Posts: 3
Joined: Mon Jan 04, 2021 10:33 pm

Re: Double sided error

#4 Unread post by Soldier1488 »

There is a separate lip in a Cresent along the thick part of the rim like you would see on a double stamp but no letter doubling that I can see

User avatar
SensibleSal66
Coin Expert
Posts: 1857
Joined: Thu Sep 10, 2020 8:06 am
Location: Connecticut
Has thanked: 701 times
Been thanked: 425 times

Re: Double sided error

#5 Unread post by SensibleSal66 »

It's a Minor off center error . Correction: Coins are Struck not stamped . Thank You
Member of CONECA
" All replies are my opinion based on experience"
Casual Collector 40+ years , 10 years Error coins ( still learning).

User avatar
Daniel
Administrator
Administrator
Posts: 15855
Joined: Wed Jan 28, 2009 4:59 pm
Location: Ohio
Has thanked: 361 times
Been thanked: 861 times
Contact:

Re: Double sided error

#6 Unread post by Daniel »

It's struck slightly off center and within mint specifications. No extra value.

User avatar
Paul
Master Die Variety Examiner
Master Die Variety Examiner
Posts: 7885
Joined: Wed May 29, 2013 9:19 pm
Location: Wisconsin
Has thanked: 218 times
Been thanked: 714 times

Re: Double sided error

#7 Unread post by Paul »

Daniel wrote: Wed Jan 06, 2021 7:37 am It's struck slightly off center and within mint specifications. No extra value.
I agree
C.O.N.E.C.A. Wi State Rep
Fly-In Club Wi State Rep

Post Reply