I have 2 clas dimes and a clad quarter that seem to have air bubbles trapped between the clad layers. Not sure if someone altered them somehow or it is indeed a mint error. These coins came from different locations at different times. Any input on it would be appreciated. I can provide a pic if necesssary.
Ed S.
Clad dime error?
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
-
Daniel
- Administrator
- Posts: 26481
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1145 times
- Been thanked: 4157 times
- Contact:
Re: Clad dime error?
Hello and welcome to the forum. The only thing I can think of is a cud, if it's along the rim. Of course, there's such a thing as bubble laminations. Post us a picture, and we can help you further.
Re: Clad dime error?
yes it is very hard to evaluate a coin without a photo....
Clad Counter2010
.01=684 .05=48 .10=160 .25=149 NA$=1 Ring=8
.01=684 .05=48 .10=160 .25=149 NA$=1 Ring=8
-
Nolifeking
- Coin Expert
- Posts: 1435
- Joined: Mon Nov 09, 2009 1:22 am
- Location: Wisconsin
- Been thanked: 1 time
Re: Clad dime error?
I've found a dime that might be similar to what you are talking about. Here is the link to the post http://coinauctionshelp.com/TPGS_FORUM/ ... f=9&t=1795
Maybe it could help somehow?
Maybe it could help somehow?
Re: Clad dime error?
Here is the pics that i have of the dime. Actuall i have 3 of them and they are all 1967. I have a quarter with the same issue as well but the date is different with that. It pretty much looks like the one linked to this post. Any ideas what may have caused it. If you look and maybe get a good dime out as a reference the "bubble" on the front is in a different place on the back.
- Attachments
-
- P1020084.JPG (54.16 KiB) Viewed 2321 times
-
-
- P1020088.JPG (66.88 KiB) Viewed 2320 times
Re: Clad dime error?
kinda looks like post mint damage... :ponder:
Clad Counter2010
.01=684 .05=48 .10=160 .25=149 NA$=1 Ring=8
.01=684 .05=48 .10=160 .25=149 NA$=1 Ring=8
Re: Clad dime error?
Agreed! I would say that heat was applied to the coin post-mint.TCOYEN wrote:kinda looks like post mint damage... :ponder:
-
- Similar Topics
- Replies
- Views
- Last post
-
- 19 Replies
- 1152 Views
-
Last post by Daniel
-
- 1 Replies
- 6174 Views
-
Last post by Daniel
-
- 4 Replies
- 961 Views
-
Last post by Earle42
-
- 6 Replies
- 423 Views
-
Last post by Daniel
-
- 5 Replies
- 752 Views
-
Last post by rrogers015
-
- 4 Replies
- 293 Views
-
Last post by Earle42
-
- 25 Replies
- 1944 Views
-
Last post by Daniel
-
- 5 Replies
- 1613 Views
-
Last post by Coinaddict411
-
- 6 Replies
- 748 Views
-
Last post by TomekD
-
- 4 Replies
- 437 Views
-
Last post by Airborn805