Missing clad layer nickel
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
- greg.allred
- Coining Around
- Posts: 1
- Joined: Sat Oct 10, 2015 1:20 pm
Missing clad layer nickel
I've been collecting for years and really enjoy a true rare find... Was at seven eleven the other day where the employees know me as the coin guy, I was shown a nickel someone had spent. It's a 1986d nickel missing BOTH clad layers. Was wondering if anyone may know of a value for this?
- mhonzell
- Administrator
- Posts: 2734
- Joined: Mon Jul 22, 2013 2:14 pm
- Location: Arizona
- Has thanked: 172 times
- Been thanked: 461 times
Re: Missing clad layer nickel
Welcome!
RMH22 wrote:Jefferson nickels are not layered like the copper-nickel clad coins (dimes, quarters, half dollars and Eisenhower and SBA dollars), so a missing clad layer is impossible (unless it was struck on a dime blank, and that does not seem to be so here). The most common way for coins to appear copper in color is improper annealing. All coins must be annealed to adjust the strength of the metal, but sometimes nickels and pennies are annealed in the same oven. This process will often cause copper molecules to be transferred off of the penny and onto the nickel, resulting in a blotchy nickel and sometimes even a complete coating. The other process is simply the copper and nickel separate. This tends to cause the copper to migrate to the surface of the nickel. Your coins, however, appear to be simply toned or dirty.
- Paul
- Master Die Variety Examiner
- Posts: 19069
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 906 times
- Been thanked: 3319 times
Re: Missing clad layer nickel
this is a very good 'post question'/'accurate response' on the jeff nick "clad issue"....& is a VERY COMMON mistake....or i should say "SCAM" (you know who you are)
i see these being sold for "stupid crazy inflated prices" quite often....why? buyers just are "not well educated", & believe they can 'flip it' for a profit, sad...but true :h
the most popular example is the known 1959 "sintered black beauty"....which are fairly easy to make as a 'looky-loo fake', if you know how.
unfortunately, every time i make a post/response here,....the 'non-genuine quantity' of fakes/home made errors spikes upward on :ebay: ....
reason being, it can be sold to a novice or intermediate for several 1000% profit.......because, today, it's all about MAKING MONEY!
i see these being sold for "stupid crazy inflated prices" quite often....why? buyers just are "not well educated", & believe they can 'flip it' for a profit, sad...but true :h
the most popular example is the known 1959 "sintered black beauty"....which are fairly easy to make as a 'looky-loo fake', if you know how.
unfortunately, every time i make a post/response here,....the 'non-genuine quantity' of fakes/home made errors spikes upward on :ebay: ....
reason being, it can be sold to a novice or intermediate for several 1000% profit.......because, today, it's all about MAKING MONEY!
- Daniel
- Administrator
- Posts: 26481
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1146 times
- Been thanked: 4157 times
- Contact:
Re: Missing clad layer nickel
Jefferson Nickels are not clad so the planchets can't be made without a clad layer.
If I had to guess then I would say the coin is toned, maybe heat was applied or some chemical to give it this color.
If I had to guess then I would say the coin is toned, maybe heat was applied or some chemical to give it this color.
-
- Coining Around
- Posts: 1
- Joined: Sun Apr 30, 2017 10:54 pm
Re: Missing clad layer nickel
I'm new to this forum and joined for the sole purpose of adding my recent experience in finding what looks like a copper nickel (1993P). At first, I too thought it was missing the clad layer on both sides. But after searching for info on what it could be I came upon this forum. The fact that a nickel does not have a clad layer only lead to more questions on this particular coin. It is visually thinner than a normal nickel and weighs less, (4.6 grams as opposed to 5grams). The diameter seems to be equal to a normal nickel. I found it going through a $50 bag of nickels from the bank. It has nicks and scratches of everyday wear and appears to be copper under the surface as well. It does not look like nickels errors made from cent planchet and weighs more than a penny. The reply's from the original post of annealing make perfect sense to me. But what puzzles me in this case is the thinner width and lower weighing. Could this be explained away also during the minting process. I'm at a loss.
- Daniel
- Administrator
- Posts: 26481
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1146 times
- Been thanked: 4157 times
- Contact:
Re: Missing clad layer nickel
Can you post and image of the coin please, front and back and sides? Thanks
- mhonzell
- Administrator
- Posts: 2734
- Joined: Mon Jul 22, 2013 2:14 pm
- Location: Arizona
- Has thanked: 172 times
- Been thanked: 461 times
Re: Missing clad layer nickel
A photo would truly help, but, not mentioned in our original answers is the commonality of 'science' experiments. People simply like to mess with coins.
While 4.6g is light, it doesn't really fit as another planchet.
While 4.6g is light, it doesn't really fit as another planchet.
- mike.sinsel
- Coining Around
- Posts: 1
- Joined: Tue Jan 23, 2018 9:14 pm
Re: Missing clad layer nickel
I have a 1941 and a 1964 that look like they're copper but there nickels I was wondering if I showed you a picture could you answer them for me and tell me what the blazes they are.
- Attachments
- Paul
- Master Die Variety Examiner
- Posts: 19069
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 906 times
- Been thanked: 3319 times
Re: Missing clad layer nickel
:welcome:
from this 1 pic,......
these hugeeyes like "environmental damage" to me ... JMO
P.S. next time, please post 'on a new thread'
from this 1 pic,......
these hugeeyes like "environmental damage" to me ... JMO
P.S. next time, please post 'on a new thread'
- Daniel
- Administrator
- Posts: 26481
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1146 times
- Been thanked: 4157 times
- Contact:
Re: Missing clad layer nickel
Nickels are not clad but a solid alloy and when they look reddish that environmental damage.
-
- Coining Around
- Posts: 1
- Joined: Fri Oct 26, 2018 1:21 pm
Re: Missing clad layer nickel
This is a typical nickel that was dug out of the ground by a guy swinging a metal detector .This is what they look like coming out of the ground. The guy finding it was to lazy to clean it before spending it.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 464 Views
-
Last post by Daniel
-
- 1 Replies
- 633 Views
-
Last post by Paul
-
- 4 Replies
- 1661 Views
-
Last post by Daniel
-
- 2 Replies
- 969 Views
-
Last post by Paul
-
- 1 Replies
- 876 Views
-
Last post by Paul
-
- 3 Replies
- 719 Views
-
Last post by Earle42
-
- 3 Replies
- 1034 Views
-
Last post by Daniel
-
- 8 Replies
- 262 Views
-
Last post by Earle42
-
- 4 Replies
- 1942 Views
-
Last post by Daniel
-
- 25 Replies
- 1944 Views
-
Last post by Daniel