question on a state quarter error
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
question on a state quarter error
I have a Rhode Island state quarter that is copper on the obverse and silver on reverse. It is thinner and weighs a gram less than a normal state quarter. Missing clad layer?? I was wondering if anyone could tell me what the value of this is, if any?
- mhonzell
- Administrator
- Posts: 2734
- Joined: Mon Jul 22, 2013 2:14 pm
- Location: Arizona
- Has thanked: 172 times
- Been thanked: 461 times
Re: question on a state quarter error
Welcome!
Would love to help, but we really need to see a photo of both sides. If you are using a cell phone, make sure you get up close, but still in focus.
Would love to help, but we really need to see a photo of both sides. If you are using a cell phone, make sure you get up close, but still in focus.
- Daniel
- Administrator
- Posts: 26524
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1148 times
- Been thanked: 4164 times
- Contact:
Re: question on a state quarter error
We do need to see photos but if it is a missing clad layer than it will need a grade. Usually these start at $50 depending on the grade.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 431 Views
-
Last post by Paul
-
- 3 Replies
- 271 Views
-
Last post by Earle42
-
- 7 Replies
- 1985 Views
-
Last post by Daniel
-
- 4 Replies
- 645 Views
-
Last post by Daniel
-
- 0 Replies
- 2772 Views
-
Last post by Penny Summer
-
- 8 Replies
- 474 Views
-
Last post by JTCC
-
- 2 Replies
- 3672 Views
-
Last post by Paul
-
- 6 Replies
- 429 Views
-
Last post by DSCoins
-
- 12 Replies
- 1039 Views
-
Last post by Earle42
-
- 4 Replies
- 251 Views
-
Last post by Daniel