Please se the attached picture. I have no clue as to value and any help would be much appreciated.
Thanks
19 64D Brokage quarter
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
- Daniel
- Administrator
- Posts: 26482
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1146 times
- Been thanked: 4157 times
- Contact:
Re: 19 64D Brokage quarter
This could be damage or an incomplete clip, but I can't see the coin well in this image.
- Paul
- Master Die Variety Examiner
- Posts: 19069
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 906 times
- Been thanked: 3319 times
Re: 19 64D Brokage quarter
first, it is important, the EVERYONE, when posting pics, post BOTH SIDES of the coin...
working from your picture....see below
if you look closely, do you see any type of 'design, lettering, numbers....so on', pressed on top of, lightly, in the 'upper' part of the coin, over the semi-circular marking?
i have an idea here :eureka: , but do not hugeeyes this as a 'part clip' or 'brockage'....from these pics
you must realize we see a ton of PMD1, or 'home-made' errors here. there are a large amount of people who do this, they list/sell them them as 'errors', because 'john q. public' just does not know any better.....
you might have to look at the coin with 'a single light source away from you, at a steep angle' to 'see' the light impressions on the surface.
1. POST MINT DAMAGE
working from your picture....see below
if you look closely, do you see any type of 'design, lettering, numbers....so on', pressed on top of, lightly, in the 'upper' part of the coin, over the semi-circular marking?
i have an idea here :eureka: , but do not hugeeyes this as a 'part clip' or 'brockage'....from these pics
you must realize we see a ton of PMD1, or 'home-made' errors here. there are a large amount of people who do this, they list/sell them them as 'errors', because 'john q. public' just does not know any better.....
you might have to look at the coin with 'a single light source away from you, at a steep angle' to 'see' the light impressions on the surface.
1. POST MINT DAMAGE
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 466 Views
-
Last post by Daniel
-
- 3 Replies
- 1827 Views
-
Last post by Paul
-
- 6 Replies
- 518 Views
-
Last post by Earle42
-
- 3 Replies
- 1441 Views
-
Last post by Earle42
-
- 4 Replies
- 488 Views
-
Last post by Earle42
-
- 6 Replies
- 645 Views
-
Last post by Daniel
-
- 13 Replies
- 914 Views
-
Last post by Jlynn8523
-
- 9 Replies
- 1025 Views
-
Last post by Paul
-
- 4 Replies
- 411 Views
-
Last post by Jlynn8523
-
- 10 Replies
- 4906 Views
-
Last post by jesjon