1968 Nickel error?
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
1968 Nickel error?
Hi everyone, well as I keep going through my pocket change. I found a 1968 Nickel a part of its edge.
My first thought was that something hammered the edge but as I looked at it through my loop. The edge is not flattened but rather like it was cut. As it narrows into the body of the coin when looked at it from the edge. What are your thoughts?- Paul
- Master Die Variety Examiner
- Posts: 19110
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 907 times
- Been thanked: 3323 times
Re: 1968 Nickel error?
... using just this 1 image,
possible small/tiny clip ?? :dunno
:eureka:
...any "blakesly effect" detected ??
whistling2:
possible small/tiny clip ?? :dunno
:eureka:
...any "blakesly effect" detected ??
whistling2:
-
- Forum Supporter
- Posts: 1863
- Joined: Sat Sep 21, 2013 6:08 pm
- Has thanked: 236 times
- Been thanked: 36 times
Re: 1968 Nickel error?
I agree with Palh1. It is always a good idea to post images of both sides of the coin and a closeup of the area in question.
Unfortunately your image gets blurry right where the missing metal is.
Can you post another image of the rim area directly opposite the missing metal?
Unfortunately your image gets blurry right where the missing metal is.
Can you post another image of the rim area directly opposite the missing metal?
- Daniel
- Administrator
- Posts: 26524
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1148 times
- Been thanked: 4165 times
- Contact:
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 6257 Views
-
Last post by mhonzell
-
- 3 Replies
- 1210 Views
-
Last post by Paul
-
- 5 Replies
- 1569 Views
-
Last post by Daniel
-
- 6 Replies
- 329 Views
-
Last post by Paul
-
- 5 Replies
- 822 Views
-
Last post by Earle42
-
- 2 Replies
- 3740 Views
-
Last post by Daniel
-
- 3 Replies
- 161 Views
-
Last post by Paul
-
- 5 Replies
- 752 Views
-
Last post by Marvic
-
- 2 Replies
- 386 Views
-
Last post by Earle42
-
- 3 Replies
- 1740 Views
-
Last post by Paul