Sample Slab Value Guide
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
- Daniel
- Administrator
- Posts: 26481
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1146 times
- Been thanked: 4157 times
- Contact:
Sample Slab Value Guide
Alan worked hard on these values and did a lot of research. http://samplecoinslabs.com/index.html/s ... ab-values/
- acan451
- Coin Wizz
- Posts: 620
- Joined: Sat Jan 29, 2011 6:12 pm
- Location: Ontario Canada
- Has thanked: 17 times
- Been thanked: 19 times
Re: Sample Slab Value Guide
Thank you Daniel
Alan
Alan
Take a look what's new in the world of samples slabs
http://samplecoinslabs.com/index.html/2 ... from-pcgs/
http://samplecoinslabs.com/index.html/2 ... from-pcgs/
-
- Coin Expert
- Posts: 1340
- Joined: Sat Mar 26, 2011 11:34 pm
- Location: Washington
- Has thanked: 97 times
- Been thanked: 37 times
- Contact:
Re: Sample Slab Value Guide
Nice Job Alan. Though on my page the facebook share stuff is in the lower portion of the first list.
Pahwa
Leave no coin unturned!
Leave no coin unturned!
- Nolifeking
- Coin Expert
- Posts: 1435
- Joined: Mon Nov 09, 2009 1:22 am
- Location: Wisconsin
- Been thanked: 1 time
Re: Sample Slab Value Guide
I'm seeing a similar problem. Might just be the browser though. Great charts though. I've helped Daniel with some coin charts and I know how much work goes into these. I've looked them over a couple times now. Hopefully I will be at a coin show and get to use one of them widegrinpahwa wrote:Nice Job Alan. Though on my page the facebook share stuff is in the lower portion of the first list.
- acan451
- Coin Wizz
- Posts: 620
- Joined: Sat Jan 29, 2011 6:12 pm
- Location: Ontario Canada
- Has thanked: 17 times
- Been thanked: 19 times
Re: Sample Slab Value Guide
Thanks Guys
That means a lot
Alan
That means a lot
Alan
Take a look what's new in the world of samples slabs
http://samplecoinslabs.com/index.html/2 ... from-pcgs/
http://samplecoinslabs.com/index.html/2 ... from-pcgs/
Re: Sample Slab Value Guide
Alan
Just looked thru your link to the PCGS sample price guide and I must add nice job! Lots of data collection on your part.
"Ser#204782. 070 1960 D Roosevelt dime PCGS $12.99 Jun,08,2012 FA.00" This one looks like it belongs in the NGC section
Not sure how to work that site yet.
But keep up the good work.
Bob
Just looked thru your link to the PCGS sample price guide and I must add nice job! Lots of data collection on your part.
"Ser#204782. 070 1960 D Roosevelt dime PCGS $12.99 Jun,08,2012 FA.00" This one looks like it belongs in the NGC section
Not sure how to work that site yet.
But keep up the good work.
Bob
Bob
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 989 Views
-
Last post by acan451
-
- 10 Replies
- 6461 Views
-
Last post by acan451
-
- 6 Replies
- 4272 Views
-
Last post by acan451
-
- 4 Replies
- 1136 Views
-
Last post by acan451
-
- 1 Replies
- 968 Views
-
Last post by Daniel
-
- 7 Replies
- 2309 Views
-
Last post by acan451
-
- 4 Replies
- 4820 Views
-
Last post by Daniel
-
- 0 Replies
- 904 Views
-
Last post by acan451
-
- 1 Replies
- 762 Views
-
Last post by Daniel