Foreign coin production at us mints.
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
-
- Forum Supporter
- Posts: 1863
- Joined: Sat Sep 21, 2013 6:08 pm
- Has thanked: 236 times
- Been thanked: 36 times
Foreign coin production at us mints.
We've had the subject of foreign coin production at US mints come up before.
If I remember correctly, someone (P?) was looking for client countries, years of production, designs, denominations and alloys.
I came across a page from MintErrorNews.com that has a pretty detailed list. Click this link:
..................Forein Coin Production at US mints
.
ps. I am looking into a 1948s AU Lincoln cent I found on a 2.3g copper looking (NOT CuNi) planchet. Could just be under size/rolled thin or "split planchet before the strike" of course (no striations on the surface though indicating a split planchet), but my imagination is rampant today! lol:
The closest foreign I have found is the 1947 El Salvador 1 Centavo @ 2.5g, 95% copper and 5% tin/zinc. Very odd reverse with lots of "dimpling" or "wavey" on 100% of the devices. (Maybe a liquid(?) interfering with the design transfer because no devices are missing, although they are "skinny", as with "struck through grease")
I will post images from my phone in a separate thread when I figure out how to get them from there to here. :confused:
Thanks for looking.
- mhonzell
- Administrator
- Posts: 2734
- Joined: Mon Jul 22, 2013 2:14 pm
- Location: Arizona
- Has thanked: 172 times
- Been thanked: 461 times
Re: Foreign coin production at us mints.
There are five pdf files that can be downloaded for free from different locations. Search criteria: "Domestic and Foreign Coins Manufactured by Mints of the United States 1793-19xx", which is the title of the document.
Substitute for "xx": 65, 70, 73, 76, 80
Do you know of any that are later? I've heard there is one that goes into the 1990s. I would think they have to keep some kind of record more often than once a decade.
Substitute for "xx": 65, 70, 73, 76, 80
Do you know of any that are later? I've heard there is one that goes into the 1990s. I would think they have to keep some kind of record more often than once a decade.
- Daniel
- Administrator
- Posts: 26524
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1148 times
- Been thanked: 4161 times
- Contact:
Re: Foreign coin production at us mints.
Sounds like a spark erosion counterfeiter or a coin dipped in acid.
-
- Forum Supporter
- Posts: 1863
- Joined: Sat Sep 21, 2013 6:08 pm
- Has thanked: 236 times
- Been thanked: 36 times
Re: Foreign coin production at us mints.
mhonzell wrote: ↑Sun Oct 29, 2017 12:52 am There are five pdf files that can be downloaded for free from different locations. Search criteria: "Domestic and Foreign Coins Manufactured by Mints of the United States 1793-19xx", which is the title of the document.
Substitute for "xx": 65, 70, 73, 76, 80
Do you know of any that are later? I've heard there is one that goes into the 1990s. I would think they have to keep some kind of record more often than once a decade.
Thanks Mark. I don't know of any later ones.
But I would think the same site ( MintErrorNews.com ) I found would have current information since they are all about mint errors.
-
- Forum Supporter
- Posts: 1863
- Joined: Sat Sep 21, 2013 6:08 pm
- Has thanked: 236 times
- Been thanked: 36 times
Re: Foreign coin production at us mints.
Daniel, You nailed it just from my description.
No doubts at all now about it being an acid dipped coin (or Draino).
I have to laugh at myself (again) because each time I convinced myself I could retire (not!) because of this rare find (struck on a foreign planchet), another nagging question would pop into my pretzel brain, that made this "error" not fit the evidence. I shrugged off the lack of a rim to it being undersized, but something was bugging me about that as well. Duh!
The acid really reduces the rims and can make it look like it never went through the upsetting machine.
Oh well, it's back out of retirement.
ps.Anyone know why the "trenching" around the devices of ONE CENT are so deep and prominent? That part was throwing me.
)Apologies for no obverse image but computer keeps saving it as an incorrect file and can't load it here.) :dunno
- Daniel
- Administrator
- Posts: 26524
- Joined: Wed Jan 28, 2009 4:59 pm
- Location: Ohio
- Has thanked: 1148 times
- Been thanked: 4161 times
- Contact:
Re: Foreign coin production at us mints.
It's how the acid erodes it where it is less dense in the fields around the more dense relief is my guess.
-
- Forum Supporter
- Posts: 1863
- Joined: Sat Sep 21, 2013 6:08 pm
- Has thanked: 236 times
- Been thanked: 36 times
Re: Foreign coin production at us mints.
Thanks Daniel. I was leaning towards different density in that area being the culprit as well.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 287 Views
-
Last post by Earle42
-
- 0 Replies
- 970 Views
-
Last post by fwd
-
- 0 Replies
- 1615 Views
-
Last post by Daniel
-
- 2 Replies
- 1201 Views
-
Last post by Earle42
-
- 2 Replies
- 4764 Views
-
Last post by Paul
-
- 0 Replies
- 1362 Views
-
Last post by tbird165
-
- 1 Replies
- 490 Views
-
Last post by Earle42
-
- 8 Replies
- 6743 Views
-
Last post by MorganHeir
-
- 1 Replies
- 5646 Views
-
Last post by JTCC
-
- 4 Replies
- 5147 Views
-
Last post by heymr.b